Shine365 Exterior Emulsion
Eureka Paints Shine365 is a 100% Pure acrylic exterior emulsion with good bacterial, UV resistance.
Key Features
Eureka Paints Shine365 is a all weather, high performance, durable coating specially designed to withstand extreme climatic conditions of high rainfall, temperature extremes and high humidity. It provides excellent bacterial and UV resistance.
Substrate Suitability
Eureka Paints Shine365 concrete, asbestos sheet ,POP, Gypsum etc. can be applied on vast range of exterior surfaces viz cement plaster, masonry,
How To Use
Surface Preparation
- Ensure that the substrate to be painted is free of any dirt, dust, oil, grease, any algea / fungal growth or any other type of contamination.
- This can be achieved by vigorous brushing of surface with media like wire, tar brush etc and cleaning with soft water.
- In case of pre painted surfaces - loose old paint etc should be throughly removed.
- Surfaces showing signs of chalking and flaking should be treated with some suitable sealer etc.
Touch Ups/Rectification
- Any touch up/ rectification required in the surface should be done with sand cement mortar only and it should be subjected to proper curing.
- For freshly plastered surface , care should be taken for proper curing and sufficient drying time.
Application System
Product | Application Tool |
Thinner | Dilution | Touch Dry | Recoat* |
Priming Eureka Paints Cement Paint |
Brush |
Water |
100% | 1hr | 2 Days After Minimum Curing - 3 Times |
OR | |||||
Eureka Paints EWP Exterior waterbase Acrylic Primer |
Brush, Roller, Spray |
Water | 60-70% | 30 mins | 4 hrs |
1st Coat Eureka Paints Shine365 100% Pure Acrylic Exterior Emulsion |
Brush, Roller, Spray |
Water | 40-45% | 1hr | 4-6hrs |
2nd Coat Eureka Paints Shine365 100% Pure Acrylic Exterior Emulsion |
Brush, Roller, Spray |
Water | 40-45% | 1hr | 4-6hrs |
* Recoat period is quoted for 25°C at 50% relative humidity - may vary under different conditions.
Technical Data
Covering** | On normal masonry surface brush applied 1 Coat : 10.5 - 11.5 sq mtr / ltr at recommended DFT 2 Coats : 5.5 - 6 sq mtr / ltr at recommended DFT |
Recommended Dry Film Thickness(DFT) |
60 - 70 microns for 2 coats |
Weight Per Ltr | 1.25+/-0.05 |
Gloss/Sheen Levels | 0-9 on glass plate at 60°, smooth finish with slight sheen |
Viscosity | 106KU+/- 2 |
PH | 8 to 9 |
Thinning | 40-45% by volume with water |
Drying Time | Touch Dry 1hr | Recoat : 4-6 hrs |
Shelf Life | Minimum 1yr when stored in original sealed container away from sunlight and excessive heat. |
Pot Life | 24 hrs |
** Actual coverage may vary on factors such as substrate porosity, method of application etc.
Precautions
Before Use
- Do not overdilute or over extend the brush
- Stir Well Before Use
Post Application
For performance optimisation - ensure proper washing and cleaning of structures at regular intervals.
Safety
Please refer to detailed MSDS of Shine365 for detailed information on safe handling of product.