Pure Gold Acrylic Distemper
Eureka Paints Pure Gold is a superior quality Acrylic Base Distemper which gives an emulsion like finish. It is a co polymer Acrylic coating that provides a smooth finish & better shade retention.
Key Features
- Eureka Paints Pure Gold Acrylic Distemper is a product which fulfill all parameters viz durability, beauty, cost effectiveness and value for money.
- Its special formulation makes it possible to develop clean shades and enables very long shade retention.
- It provides a smooth and beautiful look to the surface.
Substrate Suitability
Eureka Paints Pure Gold is compatible to the following substrates - POP, Gypsum, Gypsum board false ceilings, asbestos sheets, concrete, plaster etc.
How To Use
Surface Preparation
- Apply 2 coats of Eureka Paints Pure Gold Acrylic Distemper for repainting and 3 coats for fresh surface painting as given below:
Application System
Product | Application Tool |
Thinner | Dilution % (by vol) |
Application Viscosity (sec) |
Recoat* Period (hrs) |
Sand the surface with Emery paper 180 and wipe clean with cloth | |||||
Eureka Paints IWP Interior waterbase Acrylic Primer (Optional) |
Brush, Spray |
Water Water |
60-70% 70-75% |
30-40 20-25 |
3-4hrs 3-4hrs |
Eureka Paints Poly Plast Acrylic Putty |
Putty Knife, Spray |
Water | As required | N.A. | 4-6hrs |
Sand down with Emery Paper 180 and wipe clean | |||||
Eureka Paints IWP Interior waterbase acrylic Primer |
Brush, Spray |
Water Water |
60-70% 70-75% |
30-40 20-25 |
3-4hrs 3-4hrs |
Sand down with Emery paper 320 and wipe clean | |||||
1st Coat Eureka Paints Pure Gold Acrylic Distemper |
Brush, Spray |
Water Water |
60-70% 70-75% |
20-30 20-25 |
3-4hrs 3-4hrs |
2nd Coat Eureka Paints Pure Gold Acrylic Distemper |
Brush, Spray |
Water Water |
60-70% 70-75% |
20-30 20-25 |
3-4hrs 3-4hrs |
* Recoat period is quoted for 25° C at 50% relative humidity - may vary under different conditions.
Technical Data
Covering** | On smooth primed masonry surface by brushing: 1 coat:16-18 sq mtr/ltr 2 coats:07-10 sq mtr/ltr |
Drying Time | Surface Dry time ~10-15 minutes |
Volume Solids | 36+/-2 |
Weight per ltr | 1.40+/-0.02 |
Gloss/Sheen Levels | 0-4 on glass plate at 60°-Matt finish with slight sheen |
PH | 8 to 9 |
Touch Dry | 20 mins |
Shelf Life | Minimum 1 year from date of manufacture in original tightly closed containers |
Pot Life | Use within 24 hrs |
** Actual coverage may vary on factors such as substrate porosity, method of application etc. It is advisable and strongly recommended to check the covering on respective surface before use.
Precautions
Before Use- Do not over thin or overextend the brush
- Stir well before use
Post Application
For removing stain, sponge clean with a mild soap solution and wipe clean. Ensure a drying time of 1 week before cleaning.
No rigorous scrubbing.
Safety
Please refer to detailed MSDS of Pure Gold Distemper for detailed information on safe handling of product.