Premium Interior Emulsion
Eureka Paints Premium Emulsion is a high range acrylic base smooth interior wall finish, that provides a rich & elegant look to the walls
Key Features
- Eureka Paints Premium Emulsion provides a smooth and rich finish to interior walls. It is specially formulated to impart excellent durability to the paint film, giving your walls that 'fresh look' for years.
- It provides a relatively cleanable surface with mild soap solution.
- The paint film is also fungus and mildew resistant.
Substrate Suitability
Eureka Paints Premium Emulsion is compatible to the following substrates - P O P, Gypsum, Gypsum board, false ceilings, asbestos sheets, concrete, plaster etc.
How To Use
Surface Preparation
- Apply 2 coats of Premium Emulsion for re-painting and 3 coats for fresh surface painting as given Below
Application System
Product | Application Tool |
Thinner | Dilution % (by vol) |
Application Viscosity (sec) |
Recoat* Period (hrs) |
Sand the surface with Emery paper 180 and wipe clean with cloth | |||||
Eureka Paints IWP Interior waterbase Acrylic Primer (Optional) |
Brush, Spray |
Water Water |
60-70% 70-75% |
30-40 20-25 |
3-4hrs 3-4hrs |
Eureka Paints Poly Plast Acrylic Putty |
Putty Knife, Spray |
Water | As required | N.A. | 4-6 |
Sand down with Emery Paper 180 and wipe clean |
|||||
Eureka Paints IWP Interior waterbase Acrylic Primer |
Brush, Spray |
Water Water |
60-70% 70-75% |
30-40 20-25 |
3-4hrs 3-4hrs |
Sand with Emery paper 320 and wipe clean with cloth | |||||
1st Coat Eureka Paints Premium Interior Emulsion |
Brush, Roller, Spray |
Water Water Water |
60-70% 60-70% 70-75% |
20-30 20-30 20-25 |
3-4 hrs 3-4 hrs 3-4 hrs |
2nd Coat Eureka Paints Premium Interior Emulsion |
Brush, Roller, Spray |
Water Water Water |
60-70% 60-70% 70-75% |
20-30 20-30 20-25 |
3-4 hrs 3-4 hrs 3-4 hrs |
* Recoat period is quoted for 25° C at 50% relative humidity - may vary under different conditions.
Technical Data
Covering** | On smooth primed masonry surface by brushing: 1 coat: 26-30 sq mtr/ltr 2 coats:14-16 sq mtr /ltr |
Drying Time | Surface Dry time ~10-15 minutes |
Volume Solids | 35+/-2 |
Weight Per Ltr | 1.40+/-0.05 |
Gloss/Sheen Levels | 0-4 on glass plate at 60°- Matt finish with slight sheen |
Viscosity | 106Ku+/-2 |
PH | 8 to 9 |
Shelf Life | Minimum 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. |
Pot Life | Use within 24 hrs |
** Actual coverage may vary on factors such as substrate porosity, method of application etc.
Precautions
- Do not overdilute or over extend the brush
- Stir Well Before Use
Post Application
For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure a drying time of 1 week before cleaning. No rigorous scrubbing
Safety
Please refer to detailed MSDS of Eureka Paints Premium Interior Emulsion for detailed information on safe handling of product.