Dhoom Interior Emulsion
Eureka Paints Dhoom emulsion is the first up gradation from the distemper family. It is a co polymer acrylic coating which provides a smooth finish with better fungus resistance.
Key Features
- Eureka Paints Dhoom Emulsion is a co polymer emulsion paint that offers rich, elegant and smooth finish to the walls. It is much more durable than distemper.
- Eureka Paints Dhoom Emulsion provides a smooth finish with a very marginal difference in cost as compared to a distemper.
Substrate Suitability
Eureka Paints Dhoom Emulsion is compatible to the following substrates - P O P, Gypsum, Gypsum board false ceilings, Asbestos sheets, Concrete, Plaster etc.
How To Use
Surface Preparation
- Apply 2 coats of Eureka Paints Dhoom Emulsion for repainting and 3 coats for fresh surface painting as given below:
Application System
Product | Application Tool |
Thinner | Dilution % (by vol) |
Application Viscosity (sec) |
Recoat* Period (hrs) |
Sand the surface with Emery paper 180 and wipe clean with cloth | |||||
Eureka Paints IWP Interior Waterbase Acrylic Primer (Optional) |
Brush, spray, |
Water Water |
60-70% 70-75% |
30-40 20-25 |
3-4hrs 3-4hrs |
Eureka Paints Poly Plast Acrylic Putty |
Putty Knife, spray, |
Water | As required | N.A. | 4-6 hrs |
Sand the surface with Emery Paper 180 and wipe clean |
|||||
Eureka Paints IWP Interior Waterbase Acrylic Primer |
Brush, spray, |
Water Water |
60-70% 70-75% |
30-40 20-25 |
3-4hrs 3-4hrs |
Sand with Emery paper 320 and wipe clean with cloth |
|||||
1st Coat Eureka Paints Dhoom Emulsion |
Brush, Roller, Spray |
Water Water Water |
60%-70% 60%-70% 70%-75% |
20-30 20-30 20-25 |
3-4hrs 3-4hrs 3-4hrs |
2nd Coat Eureka Paints Dhoom Emulsion |
Brush, Roller, Spray |
Water Water Water |
60%-70% 60%-70% 70%-75% |
20-30 20-30 20-25 |
3-4hrs 3-4hrs 3-4hrs |
* Actual coverage may vary on factors such as substrate porosity, method of application etc.
It is advisable and strongly recommended to check the covering on respective surface before use.
Technical Data
Covering** | On smooth primed masonry surface by brushing: 1 coat:26-30 sq mtr/ltr | 2 coats:14-16 sq mtr /ltr |
Drying time | Surface Dry time ~ 10-15 minutes |
Volume Solids | 36+/-2 |
Weight Per Ltr | 1.40+/-0.02 |
Gloss/Sheen Levels | 0-4 on glass plate at 60°- Matt finish with slight sheen |
PH | 8 to 9 |
Touch Dry | 20 mins |
Shelf Life | Minimum 1 year from date of manufacture in original sealed container |
Pot Life | Use within 24 hrs |
**Actual coverage may vary on factors such as substrate porosity, method of application etc.
It is advisable and strongly recommended to check the covering on respective surface before use.
Precautions
Before Use
- Do not overdilute or over extend the brush
- Stir Well Before Use
Post Application
- For removing stain, sponge clean with a mild soap solution and wipe clean. Ensure a drying time of 1 week before cleaning.
- No rigorous scrubbing.
Safety
Please refer to detailed MSDS of Dhoom Emulsion for detailed information on safe handling of product.